MTC | KnowledgeHub |

Motorbike part revs up Additive Manufacturing prowess

The MTC worked with GRM and K-Tech on a project to investigate the weight-saving of an additive manufactured motorbike part.

“The MTC's experience in additive manufacturing technologies has been a great help in ensuring our tools compliment these emerging technologies.”

Martin Gambling, Managing Director at GRM Consulting Ltd.

The Challenge

  • Design SMEs GRM and K-Tech were keen to further investigate the capability of Additive Manufacturing (AM)
  • In order to fully utilise the benefits of AM for product improvement, GRM and K-Tech were looking to develop knowledge and expertise in considerations for Design for AM 
  • K-Tech had previously designed and manufactured a motorbike fork end, and were looking to improve this product

MTC’s Solution

  • Working with GRM using TruForm topology optimisation, the MTC facilitated fast iteration of designs to optimise the motorbike fork
  • Two motorbike forks were manufactured in a titanium alloy using Electron Beam Melting (EBM)
  • The MTC performed non destructive evaluation (NDE) via structured light scanning. This was carried out using GOM for geometric conformance and X-ray computed tomography for defect detection

The Outcome

  • Electron beam additive manufactured components with assurance of quality via NDE
  • Optimisation of component design, achieving a 50g weight saving per component. The switch to titanium improved fracture toughness.

Benefits to the client

  • Fast iteration and design change implementation throughout project
  • Product and process knowledge captured for use in future GRM and K-Tech programmes
  • Transferable capability and knowledge obtained as a result

“Through the support of the MTC, GRM were able to learn, apply and demonstrate our TruForm design tool to great success.”

Martin Gambling, Managing Director at GRM Consulting Ltd.